Description
Sanlight Q Series (Gen2) AC Power Cable is the dedicated mains power cable for Sanlight Q Series Gen2 LED grow lights, providing the correct connector type and cable specification needed to safely and correctly power these premium Austrian LED fixtures. We have been recommending Sanlight LED systems to UK growers since 2017 as one of the finest and most energy-efficient LED grow lights available, and maintaining proper, manufacturer-specified cabling is a fundamental requirement for safe operation of any high-power electrical equipment.
Why Using the Correct Power Cable Matters for Sanlight Q Series Fixtures
The Sanlight Q Series Gen2 LED fixtures use a specific power connector format that is different from a standard IEC kettle lead or figure-8 plug. Using an incorrect cable or adapter introduces safety risks — mismatched connectors can create poor electrical contact, leading to resistance heating at the connection point, potential arcing, and in worst cases, fire. The Sanlight Q Series (Gen2) AC Power Cable is designed and approved specifically for use with these fixtures, with the correct connector, correct cable cross-section for the current demands of the fixture, and appropriate insulation and strain relief for the operating conditions in a grow room. Sanlight fixtures are precision-engineered and quality-certified to CE and UKCA standards, and maintaining this certification through a grow room installation means using the approved accessories. The cable also ensures compatibility with Sanlight’s daisy-chain power distribution system for multiple Q Series fixtures connected to a single circuit.
How to Connect the Sanlight Q Series AC Power Cable
Connect the fixture-end connector to the power input port on the Sanlight Q Series Gen2 fixture, ensuring it seats fully and locks in place. Connect the mains plug end to an appropriate wall socket or grow room power distribution unit. For multiple fixtures on a single circuit, use the Sanlight daisy-chain capability in combination with appropriate cables as described in the fixture documentation. Always calculate the total load of all connected fixtures and ensure the circuit and extension leads are rated for the combined wattage before powering up. Never modify or extend the cable — use a correctly rated extension lead if additional length is required.
Browse our full Sanlight Q Series Gen2 range for complete LED fixtures, interconnect cables, and all the accessories needed for a professional Sanlight-powered grow room installation. Contact us for advice on circuit planning for multiple Sanlight fixtures.
Reviews
There are no reviews yet.