REVOLUTION BRACKET 200MM

Description

Revolution Bracket 200mm is a precision-engineered fan mounting bracket designed to suspend a 200mm Revolution inline fan from the crossbars or frame of grow tents and structural supports, holding the fan securely in the correct position for connection to carbon filters and ductwork while minimising the vibration transmission that causes noise in grow room installations. We have been recommending Revolution fans and their matching accessories to UK growers since 2017 as part of a complete, professionally engineered ventilation system where every component is designed to work together for optimum performance and minimum noise.

Why the Right Fan Bracket Makes a Significant Difference

How a fan is mounted has a profound effect on the noise it generates in practice. A fan suspended from rigid wire rope or chain attached directly to a structural member transmits motor vibration into the building structure, creating a low-frequency drone that can be audible in adjacent rooms even when the fan itself is well-silenced. The Revolution Bracket 200mm is designed with vibration-isolating mounting points that absorb motor vibration before it reaches the support structure, significantly reducing structure-borne noise. The bracket also holds the fan at the correct height and angle for clean, aligned connections to the carbon filter below and the exhaust ductwork above — misaligned connections create turbulence and noise that a properly positioned bracket eliminates. The robust construction handles the combined weight of the fan and connected carbon filter without flex or movement that would stress connection joints over time.

How to Install the Revolution 200mm Bracket

Attach the bracket to the grow tent crossbar or structural support using the included mounting hardware, positioning it directly above the location where the carbon filter will hang. Hang the Revolution 200mm fan from the bracket’s vibration-isolating mounting points, ensuring the fan is level and the outlet port points in the correct direction for your duct run. Connect the carbon filter below the fan using a rubber duct coupling for additional vibration isolation. Route your outgoing ductwork from the fan outlet upward and out through the tent’s exhaust port. Check all connections are secure before operating the system at full speed.

Pair the Revolution Bracket 200mm with a Revolution Vector EC 200mm fan, Can-Lite carbon filter, rubber duct couplings, and Phonic Trap ducting for a complete, low-noise ventilation system. Browse our full Revolution fan and ventilation accessories range.