LUMATEK LED DRIVER 5 METRE EXTENSION CABLE 2.0

Description

Lumatek LED Driver 5 Metre Extension Cable 2.0 is an official Lumatek extension cable that allows the external LED driver unit of compatible Lumatek LED fixtures to be positioned up to 5 metres away from the light head, providing greater flexibility in grow room cable management and driver placement. We have been recommending Lumatek LED systems to UK growers since 2017 as a high-performance, commercially proven LED brand, and the external driver architecture that this cable supports is one of the key engineering advantages of Lumatek’s professional LED design.

Why External Drivers with Extension Cables Improve Grow Room Flexibility

Lumatek’s professional LED fixtures use an external driver design — the LED driver (the power conversion electronics) is a separate unit from the light head, connected by a cable. This architecture has several important advantages over integrated designs where driver electronics are mounted inside the light fixture. By separating the driver from the LED head, the heat generated by the driver electronics is produced outside the growing canopy rather than directly above it, reducing the heat load on the canopy and allowing the LED diodes themselves to run at lower temperatures that extend their service life and maintain output efficiency. The external driver can be positioned outside the grow tent entirely — mounted on the frame or on a shelf nearby — keeping its heat out of the growing environment completely. The 5-metre Version 2.0 extension cable extends the distance between driver and fixture to 5 metres, providing maximum flexibility for positioning the driver in the most convenient and thermally appropriate location relative to the grow space.

How to Use the Lumatek LED Driver 5 Metre Extension Cable 2.0

Connect one end of the extension cable to the driver output connector and the other end to the LED head input connector, ensuring both connections are fully seated and locked. Route the cable cleanly between the driver’s mounting position and the light head hanging position, securing with cable clips at regular intervals to prevent the cable from hanging freely where it could be caught or stressed. The cable is compatible with the Lumatek Zeus Pro, Attis, and other compatible external-driver LED models — check Lumatek’s compatibility documentation to confirm suitability for your specific fixture version before purchase.

Browse our full Lumatek LED range for Zeus Pro, Attis, and all compatible fixtures, controllers, and accessories. The extension cable is the ideal solution for growers who need driver flexibility in their grow room layout.